Silicon Labs current sensor chips
2008-11-17 22:13:03.633506+01 by
Dan Lyke
3 comments
Silicon Labs makes current sensor chips which do the integration and temperature calibration automagically, including a $19.95 current sensing evaluation kit that takes up to 10A in and gives 2.0v out. I think I want to figure out how to build something with the 20A chip, but couple this with an AVR RAVEN and even at off-the-shelf and lots of capability that'll never get used this is close to "put one on every socket in the house".
[ related topics:
Cool Technology Real Estate
]
comments in ascending chronological order (reverse):
#Comment Re: made: 2008-11-17 23:07:00.515171+01 by:
Dan Lyke
So if you've gotten this far ("Hi, Dad!"), anyone got suggestions for building a safe device that deals with 15A loads on a PCB? How big should the traces be? Are there considerations about solder temperature that I should worry about?
Also, how about extremely low current power supplies to run the microcontroller with? When I was thinking about doing this with a current transformer, I was thinking I could charge NiCads or a supercap with a parasitic load off of a similar arrangement, but this says that I want something simpler. I guess it's time to dig out that switching power supplies tome I've got somewhere, see what sort of drain various capacitors have, and see if I can build a nano-watt scale power supply. Of course doing that right also means that I have to manage the CPU power fairly effectively.
#Comment Re: made: 2008-11-18 01:52:22.388234+01 by:
Larry Burton
Dan, pick up a copy of Ugly's Electrical Pocket Reference Book to help you answer these questions.
#Comment Re: made: 2008-11-18 02:15:37.731728+01 by:
meuon
The Standard is 5a current sensor, and you buy CT's aka Current Transformers for higher currents. I just got in 9 CT's. 3 of them are 2500:5 factor, that means 2500 AMP capacity, at 480 volts.. x 3 phases, one for each phase.
And Larry, Thanks for the link to Ugly's book. I'm buying at least one. :)
We will not edit your comments. However, we may delete your
comments, or cause them to be hidden behind another link, if we feel
they detract from the conversation. Commercial plugs are fine,
if they are relevant to the conversation, and if you don't
try to pretend to be a consumer. Annoying endorsements will be deleted
if you're lucky, if you're not a whole bunch of people smarter and
more articulate than you will ridicule you, and we will leave
such ridicule in place.