2003-04-21 22:33:53.411083+02 by Dan Lyke 3 comments
Phil pointed me to ExpressPCB. Download free software to design your schematic and layout your circuit board, press the "order" button, pay for the boards. At $62 for a minimum order, and I'll bet you could duplicate a circuit once or twice on the board for that, this is competitive with a whole lot of "single board computer" circuit boards, except it's custom. Probably not the cheapest, but looks like a cool implementation.
[ related topics: Free Software Software Engineering Graphic Design Embedded Devices ]
comments in ascending chronological order (reverse):
#Comment made: 2003-04-21 23:41:45.73939+02 by: meuon
$62 or anything under $100 is worth it if they do it well. Thank You!
#Comment made: 2003-04-22 14:52:50.132421+02 by: ebwolf
Wheee!!! Back in the '80s when I was a high school intern at NASA, I marveled over the PCD design and fab system they had (very, very simple by today's standards). Of course most complex PCBs can be implemented with a since PLC chip...
But $62 is a helluva a lot cheaper than even wire-wrapping a prototype. Sockets and discrete chips gets pricey! Not to mention the hours of tedious wire twisting.
#Comment made: 2003-04-22 18:15:31.270477+02 by: Dan Lyke
I've ordered a handful of Atmel AT90S8535s, they're marked as obsolete, but 8k of ROM and half a K of EEPROM and RAM each, along with the UART, the 10 bit A/D channels and a pair of timers, all at 8MHz is a hell of a lot more than my first computer, and migration to the new generation shouldn't be all that hard if I decide to go anywhere with it. For now I just want to play with moving some small motors around.
And I've been building a bunch of brass attachments for a sewing machine to help align fabric. Hmmm...
We will not edit your comments. However, we may delete your comments, or cause them to be hidden behind another link, if we feel they detract from the conversation. Commercial plugs are fine, if they are relevant to the conversation, and if you don't try to pretend to be a consumer. Annoying endorsements will be deleted if you're lucky, if you're not a whole bunch of people smarter and more articulate than you will ridicule you, and we will leave such ridicule in place.
Flutterby™ is a trademark claimed by
Dan Lyke for the web publications at www.flutterby.com and www.flutterby.net.