Today's progress
2011-12-18 02:16:14.894133+01 by Dan Lyke 5 comments
Today's progress, preliminary door, wiring. http://www.flutterby.net/2011-12-17_Workshop_Door_and_Wiring
2011-12-18 02:16:14.894133+01 by Dan Lyke 5 comments
Today's progress, preliminary door, wiring. http://www.flutterby.net/2011-12-17_Workshop_Door_and_Wiring
comments in descending chronological order (reverse):
#Comment Re: made: 2011-12-25 18:56:18.359373+01 by: m
Very nice wiring. I am sorry to say that I have pretty much the same arrangement of 120V. Two circuits down each long wall with 4 socket boxes every 8' alternating every 4' in conduit. I still have to use more extension cords and outlet expanders than I am happy with. I suspect that if I had a wall of nothing but outlets, it wouldn't be enough. Sigh.
#Comment Re: made: 2011-12-25 18:42:25.588532+01 by: m
Good idea on the sliding door. I have a double without a median strip, but it is too short to get any lifting equipment in. Getting an 800lb lathe out will be a bitch, but I will probably be dead when that happens.
#Comment Re: made: 2011-12-22 06:02:15.537487+01 by: jeff
Looking like progress, Dan!
#Comment Re: made: 2011-12-21 01:18:20.702883+01 by: Dan Lyke
Thank you. There's one stretch there that I had to bend 4 times to get a kink-free set of curves... Compound curves are a bitch.
#Comment Re: made: 2011-12-19 16:49:57.177621+01 by: Larry Burton
Nice conduit bends.
We will not edit your comments. However, we may delete your comments, or cause them to be hidden behind another link, if we feel they detract from the conversation. Commercial plugs are fine, if they are relevant to the conversation, and if you don't try to pretend to be a consumer. Annoying endorsements will be deleted if you're lucky, if you're not a whole bunch of people smarter and more articulate than you will ridicule you, and we will leave such ridicule in place.
Flutterby™ is a trademark claimed by
Dan Lyke for the web publications at www.flutterby.com and www.flutterby.net.